top of page
The Cobb LF BPV is a compact and lightweight by-pass valve that is capable of holding very high boost pressure without leaking. Its updated design reduces control volume by 30% allowing for extremely fast venting of boost when actuated. Innovative engineering and precision manufacturing result in a compact package able to fit in the confines of a tight engine bay. Due to the low weight of the components, the moving parts in the LF BPV have less inertia and can respond faster than heavier components in other bypass valves. This updated design uses a Banjo-fitting vacuum port which provides 360 degree adjustability of hose routing.

compatible vehicles Subaru WRX 2008-2014, FXT 2009-2013, OBXT/LGT 2005-2009, Mazdaspeed3 2007-2013, Mazdaspeed6 2006-2007
material Aluminum
weight 1.5 lbs
length 5 inches
width 3 inches
height 2 inches
spring seat adjustability No
piston o-ring seal Twice the diameter of the old design
clamping force at peak boost 60% increase

Cobb LF Bypass Valve 08-14 Subaru WRX / 09-13 FXT / 06-07 Mazdaspeed

SKU: 724665
$370.00Price
Quantity
  • Cobb 06-07 Mazdaspeed6 / 08-14 Subaru WRX / 09-13 FXT LF Bypass Valve

    Migtuned Performance - Subaru, Mazda, GTR & Fiesta E-Tuning Jacksonville FL, Philadelphia PA

    Mon-Fri : 8am - 5pm

    Sat : 9am - 3pm

    2771 Monument Rd, STE 29

    Jacksonville, FL 32225

    DISCLAIMER

    Products sold by MIGTUNED LLC are sold for off-road use only and are intended for racing vehicles which may never be used on a public road/highway. By purchasing any aftermarket performance product, the customer takes full responsibility for any use, and/or misuse of the product and agrees that MIGTUNED LLC holds no responsibility for any consequences, legal, or other, of such use and/or misuse. All non-dynamometer tuning techniques, if abused, have the ability to surpass what is considered legal on public roads/highways. Clients are advised of these hazards, advised to use safe closed road courses or race tracks for tuning thus waiving MIGTUNED LLC from all liability in any road incidents/infractions during the tuning process and thereafter. ECU Tuning and calibrating is an intensive and stressful procedure that will always run the risk of engine and/or other drivetrain damage. Although all precautions will be taken to protect clients vehicles, hardware is the common denominator that drive engines to fail. The chance of this happening can be greatly reduced by monitoring engine gauges and regular maintenance well after the tuning session(s). There are no warranties or coverages of any damages during the tuning process or any issues forever after tuning. All sales are final once initial map is sent and/or flashed to the car. No credits nor refunds are accepted, MIGTUNED LLC reserves all rights and discretion on any and all refunds and disputes. All submitted payments are considered signatures of acceptance of these terms and understandings.

    MIGTUNED 2024 by OPHIS DESIGN
    • Instagram
    • Facebook
    • YouTube
    • TikTok
    bottom of page